Used Fluid Bed Dryers and Processors

A fluid bed dryer pushes heated air up through a perforated plate until the product lifts and behaves like a fluid. Every particle sits in the airstream, so wet granules dry quickly and evenly. On a multi-processor built for it, a spray system and the right insert turn the same fluidized bed into a top-spray granulator, a bottom-spray Wurster coater, or a rotor pelletizer. Lab fluid bed dryers handle a few grams for formulation work, and production units handle full commercial batches.

Federal Equipment Company stocks more than 80 used fluid bed dryers, processors, and accessories. Most are batch units that load, process, and discharge one bowl at a time. Continuous units feed and discharge product without stopping, and bowls, inserts, and accessories are sold separately. Product bowls range from 0.5 to 1,700 liters. Brands we see regularly include Glatt, Vector, Freund-Vector, Fluid Air, Aeromatic-Fielder, GEA, O'Hara, and Witte. Most units are held at our Cleveland, OH facility and are available for inspection.

Can't Find What You Need?

Request Sourcing Help Tell us the batch size and the process (drying, granulating, or coating), plus any solvent, containment, or explosion-protection requirements. We will look for it across our network.

Sell Your Equipment We buy surplus fluid bed dryers, processors, and inserts outright. Send us a list, and we will make an offer.

Browse our selection below and request a quote for more information regarding our Used Fluid Bed Dryers and Processors.

You can also view our full on-hand inventory across all categories.

Need Parts for Fluid Bed Dryers / Processors?

Discover a wide range of parts and purchase instantly at PharmParts.com .

Page 2

Every batch fluid bed machine shares the same core: an air handler that filters, heats, and sometimes dehumidifies the inlet air, a product bowl with a perforated distributor plate, an expansion chamber, filter bags or cartridges, and an exhaust fan. Inlet air is usually steam-heated, electrically heated, or gas-fired. What changes from one process to the next is the insert. Top-spray inserts granulate by spraying binder onto the fluidized powder. Wurster inserts spray from below inside a draft tube, which coats pellets, beads, and many small particles evenly. Rotor inserts spin a disk in the bowl to build dense spheres.

On a multi-processor, inserts swap in and out, so one machine can dry, granulate, and coat. Ask which inserts, bowls, and spray guns come with a unit, since they decide what the machine can run on arrival. The bowls, parts, and accessories listings carry Wurster inserts from 4 to 46 inches, top-spray and rotor inserts, expansion chambers, bowl lifts, and spare product bowls.

Batch and continuous machines solve different problems. A batch processor keeps a defined lot in one bowl from wet to dry, which is why it dominates pharmaceutical granulation and coating. Most continuous fluid beds here feed product onto a long deck, often vibrating, and discharge it at the far end. Deck widths range from 4 to 36 inches and lengths from 36 inches to 13 feet. These handle steady, high-volume drying and cooling, such as Witte cooler classifiers that cool and screen compounded plastic pellets. Continuous granulation lines, such as GEA ConsiGma systems, work differently: they granulate continuously, then dry in a segmented fluid bed that fills and empties one cell at a time.

Model families recur here, and buyers tend to search by them. We handle Glatt GPCG and GPCG Pro processors, WST dryers, and Mini-Glatt, Midi-Glatt, and Uni-Glatt lab units; Aeromatic-Fielder STREA-1 lab dryers, MP-Micro multi-processors, and T-series and S-series dryers; GEA and GEA Niro MP multi-processors and ConsiGma continuous mixing and granulation systems; Vector and Freund-Vector VFC-Lab Flo-Coaters, FL-M multi-processors, and MFL.01 micro units; Fluid Air Model 0002, 0020, and 0300 processors; O'Hara FBDG dryer granulators; and continuous units from Witte, Carrier, Carman, and Kason.

Lab and pilot units make up a large share of this category. Batch sizes start at a few grams on lab processors, which suits formulation and scale-up trials. Our training division, Techceuticals, covers fluid bed granulation and Wurster coating in its hands-on Granulation Technologies and Film Coating Technologies courses in Cleveland, OH.


Applications & Industries

  • Solid dosage production: drying wet granulation from a high shear mixer, top-spray granulation, and Wurster coating of pellets and beads ahead of encapsulation or compression.
  • Pharmaceutical manufacturing: drying, granulating, and coating in GMP production. Solvent-based processes call for explosion protection, such as a shock-rated design or suppression, and potent products call for containment. These are separate requirements, so confirm each on the specific unit.
  • Laboratory and pilot work: bench-top and lab fluid bed dryers, such as STREA-1, Mini-Glatt, MP-Micro, and VFC-Lab units, for formulation development and scale-up trials.
  • Plastics and polymers: continuous fluid bed coolers and cooler classifiers that cool and size compounded pellets after the extruder.
  • Chemical processing: continuous drying and cooling of granular chemicals, salts, and crystals on vibrating fluid bed decks.
  • Food and beverage: drying and cooling granular food ingredients on stainless steel continuous units.

Specifications & Configurations

Specification Range
Product bowl volume 0.5 liters to about 1,900 liters
Batch capacity 5 grams on lab processors to 1,500 kg on production processors
Wurster insert size 4" to 46"
Shock rating 2 bar (vented or suppressed designs) to 12 bar (pressure-shock resistant)
Process air blower 0.75 to 100 HP
Continuous deck size From 4" wide x 36" long to about 4' wide x 24' long; larger on custom builds
Inlet air heating Steam, gas-fired, and electric
Materials of construction 304, 316, and 316L stainless steel, carbon steel, nickel alloys, titanium, and glass

Design variants. Batch fluid bed dryers, top-spray granulators, bottom-spray Wurster coaters, rotor granulators, multi-processors with interchangeable inserts, continuous granulation systems, vibrating continuous dryers, fluid bed coolers, cooler classifiers, and circular vibrating fluid bed dryers.

Common options. Wurster, top-spray, and rotor inserts, multiple product bowls, spray guns and peristaltic pumps, dehumidification coils, HEPA filtration, explosion suppression, wash-in-place and CIP systems, bowl lifts and inverters, and PLC controls with HMI.


Why Buy Used

A new fluid bed processor is a build-to-order item, with lead times measured in months once the air handler, shock rating, and insert package are specified. A used machine of the same size typically costs a fraction of the new price, and in-stock units can often ship in weeks.

Much of the wear on these machines sits in parts that come off. Filter bags, gaskets, spray nozzles, and distributor screens all get replaced, and inserts and bowls trade separately. A stainless steel bowl and expansion chamber that ran clean product can have years of service left. Confirm which parts of the system come with a unit: the air handler, filter housing, exhaust fan, controls, and spray package. Check the shock rating and its documentation, the heating method, and the insert set against your process, and ask about the age of the air handler and controls and the ceiling height the expansion chamber needs.

Every unit is inspected when it arrives at our Cleveland, OH facility, and it is available for customer inspection before purchase. Refurbishment and testing can be arranged upon request. Process validation for your own product and facility remains with the buyer.